O NAIL SUNX PRO AI Nail Lamp – White

Bring focused, intelligent curing to the salon with the white O NAIL SUNX PRO. Its camera-led AI mode detects the nail area and directs light where it is needed, helping reduce unnecessary UV exposure to the surrounding skin while the 109-LED array delivers even coverage.

Why nail professionals choose SUNX PRO

• AI nail recognition: Tracks the detected nail area and focuses the curing light on it.
• 109 rotating UV/LED lights: Alternating operation spreads the workload across the array for consistent coverage and longer service life.
• Dual wavelength: 365 nm + 405 nm output supports base coat, colour gel, top coat, builder gel and extension gel.
• Four dedicated programmes: A for base coat and colour gel, B for hard-to-cure colour gel, F for builder or extension gel, and T for top coat.
• AI and standard modes: Use focused AI curing or switch to full-coverage non-AI operation.
• Built-in display: The 864 × 480 screen provides an intuitive visual curing experience.
• Salon connectivity: 2.4 GHz Wi-Fi supports device updates.

O NAIL states that its focused 109-LED system can cure up to 50% faster than a conventional lamp while reducing missed spots, including around the thumbs.

Curing programmes

• A: 30 seconds in AI mode / 45 seconds in standard mode
• B: 90 seconds in AI or standard mode
• F: 75 seconds in AI mode / 90 seconds in standard mode
• T: 120 seconds in AI or standard mode

Specifications

• Model: SUNX PRO plug-in
• Colour: White
• Power: 30 W
• Device input: 12 V ⎓ 2.5 A via external adapter
• Adapter input: 100–240 V AC, 50/60 Hz, 1.0 A max
• Light source: 109 UV/LED lights
• Wavelengths: 365 nm + 405 nm
• Display: 864 × 480 pixels
• Connectivity: 2.4 GHz Wi-Fi
• Dimensions: 210 × 199 × 98 mm
• Weight: 995 g

What's included

• O NAIL Skin Health No.1 AI Nail Lamp
• Power adapter with USB-C cable
• QR manual card

Please note: This listing is for the plug-in white SUNX PRO. A battery bank and wireless remote are not included.

How to use

1. Connect the supplied adapter and place the lamp on a stable, dry work surface.
2. Select AI mode for nail-targeted light or standard mode for full coverage.
3. Choose A, B, F or T to match the gel step being cured.
4. Place the hand flat inside the lamp with every nail visible and allow the selected cycle to finish.
5. Follow the gel manufacturer's curing directions and the supplied O NAIL manual.